7S 24V 15A BMS Lithium Battery BMS for E-scooter

This FY•X high quality 7S 24V 15A BMS lithium battery BMS for E-scooter is a BMS specially designed by Huizhou Feiyu New Energy Technology Co., Ltd. for scooter battery packs. It is suitable for 7-string lithium batteries with different chemical properties, such as lithium ion, lithium polymer,lithium iron phosphate, etc.

It has charging and discharging over-voltage, over-current, short circuit and high and low temperature protection, which is safe and reliable. The protection board has strong load capacity and the maximum sustainable discharge current canreach 15A.

It has secondary protection such as charging and discharging overvoltage and undervoltage temperature.

FY•X high quality 7S 24V 15A BMS lithium battery BMS for E-scooter Functional characteristics

● Seven batteries are protected in series.

● Overcharge, over-discharge, discharge over-current and other protection functions.

● Output short circuit protection function.

● Charge and discharge high and low temperature protection function.

● Overcharge, over-discharge, charge and discharge high temperatur secondary protection function.

Physical reference picture

Figure 1: Front view of BMS (the picture does not match the actual object and is for reference only)

Figure 2: Actual picture of the reverse side of BMS (the picture does not match the actual object and is for reference only)

Electrical parameters(Ta = 25 ℃.)

PCB size structure diagram                    

Figure 12: Dimensions 189*40 Unit: mm Tolerance: ±0.5mm

Protection board thickness: less than 10mm (including components)

Port Definition

11: Protection board wiring diagram

Port definition description:

Figure 12: Schematic diagram of battery connection sequence

Precautions for connecting the protective board and the battery core

Warning: When connecting the protective plate to the battery cells or removing the protective plate from the battery pack, the following connection sequence and regulations must be followed; if operations are not performed in the required order, the components of the protective plate will be damaged, resulting in the protective plate being unable to protect the battery. core, causing serious consequences.

Preparation work: As shown in Figure 11, weld the corresponding nickel strip of the battery core to the corresponding pad of the protective plate. Please note the order indicated.

Steps to install protective board:

Step 1: Solder the P+/C+/P-/C- lines to the P+/C+/P-/C- pads of the protection board without connecting the charger and load;

Step 2: Connect the negative pole of the battery pack to B- of the protection board;

Step 3: Weld B1, B2, B3, B4, B5, B6, B+ to the corresponding pads of the protection board in sequence;

Steps to remove the protective plate:

Step 1: Disconnect all chargers\loads

Step 2: Disconnect B+, B6, B5, B4, B3, B2, B1 in sequence;

Step 3: Remove the connecting wire connecting the negative electrode of the battery pack from the B-pad of the protective plate;

Additional notes: Please pay attention to electrostatic protection during production operations.

BOM list of main components

Note: If the main selection material of the patch is out of stock, our company may replace it with other models with similar specifications, and then communicate and confirm.

Ordering information

1 Feiyu company logo;

2 Protection board model - (This protection board model is Fish07S002, other types of protection boards are marked, there is no limit to the number of characters in this item)

3. The number of battery strings supported by the required protection board - (this model of protection board is suitable for 7S battery packs);

4 Charging current value - 5A means the maximum support for continuous 5A charging;

5 Discharge current value - 15A means maximum support for continuous charging of 15A;

6 Balance resistance size - fill in the value directly, for example, 100R, then the balance resistance is 100 ohms;

7 Battery type - one digit, the specific serial number indicates the battery type as follows;

8 The model number of this protection board is: FY-Fish07S002-7S-5A-15A-0R-4-V1.0. Please place the order according to this model number when placing bulk orders.

Also note:

1. When performing charge and discharge tests on the battery pack with the protective board installed, please do not use a battery aging cabinet to measure the voltage of each cell in the battery pack, otherwise the protective board and battery may be damaged. .

2. This protection board does not have a 0V charging function. Once the battery reaches 0V, the battery performance will be severely degraded and may even be damaged. In order not to damage the battery, the user should not charge the battery for a long time (the battery pack capacity is greater than 15AH, and the storage exceeds 1 Months) When not in use, it needs to be charged regularly to replenish the battery; when in use, it must be charged in time within 12 hours after being discharged to prevent the battery from being discharged to 0V due to self-consumption. Customers are required to have an obvious sign on the battery casing that the user regularly maintains the battery.

3. This protection board does not have reverse charging protection function. If the polarity of the charger is reversed, the protection board may be damaged.

4. This protective board shall not be used in medical products or products that may affect personal safety.

5. Our company will not be responsible for any accidents caused by the above reasons during the production, storage, transportation and use of the product.

6. This specification is a performance confirmation standard. If the performance required by this specification is met, our company will change the model or brand of some materials according to the order materials without further notification.

7. The short-circuit protection function of this management system is suitable for a variety of application scenarios, but it does not guarantee that it can be short-circuited under any conditions. When the total internal resistance of the battery pack and short-circuit loop is less than 40mΩ, the battery pack capacity exceeds the rated value by 20%, the short-circuit current exceeds 1500A, the inductance of the short-circuit loop is very large, or the total length of the short-circuited wire is very long, please test by yourself to determine whether This management system can be used.

8. When welding battery leads, there must be no wrong connection or reverse connection. If it is indeed connected incorrectly, the circuit board may be damaged and needs to be retested before it can be used.

9. During assembly, the management system should not directly contact the surface of the battery core to avoid damaging the circuit board. The assembly must be firm and reliable.

10. During use, be careful not to touch the lead tips, soldering iron, solder, etc. on the components on the circuit board, otherwise the circuit board may be damaged.

Pay attention to anti-static, moisture-proof, waterproof, etc. during use.

11. Please follow the design parameters and usage conditions during use, and the values in this specification must not be exceeded, otherwise the management system may be damaged. After assembling the battery pack and management system, if you find no voltage output or failure to charge when you power on for the first time, please check whether the wiring is correct.

Note: After your company receives the prototype and specifications, please reply promptly. If there is no reply within 7 days, our company will regard your company as having recognized the specifications and send the prototype. If your order exceeds 50 PCS, you need to sign back the acknowledgment letter. If you do not sign back, our company will also regard your company as having approved this specification and send the sample machine. The pictures in the specification are of general-purpose models, which may be slightly different from the sample delivered. Feiyu reserves the right of final interpretation of this specification.

DISCLAIM:

In order to improve the design or performance and to supply the best possible products, Feiyu reserves the right to make changes to the products contained in this data sheet. Feiyu assumes no responsibility for the use of any circuits shown in this data sheet, conveys no license under any patent or other rights, and makes no claim that the circuits are free from patent infringement. Applications for any devices shown in this data sheet are for illustration only and Feiyu  makes no claim or warranty that such applications will be suitable for the use specified without further testing or modification.

LIFE RELATED POLICY:

In situations where semiconductor component failure may endanger life, system designers using this product should design the system with appropriate error detection and correction, redundancy and back-up features to prevent such an occurrence.

Feiyu’s products are not authorized for use in critical components in life support devices or systems.

1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user.

2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.